Invoice payment for companiesDelivery across RussiaNew: LOMMART SA1.5 cableOfficial Form Factor seller

Form Factor Audio

Bi1000Di Mk III

224 170 ₽incl. 22% VAT

In stock SKU Bi1000Di Mark III

For companies: after your order request a manager calls to confirm it and issues an invoice. "Available to order": made or shipped after you order; the manager will give you the lead time.

Ask about this product →

Description

Unmatched Power, Precision, and Reliability for the Modern Bassist

The Bi1000 Di Mark III represents the newest evolution of Form Factor Audio's acclaimed Bass Instinct series. Designed and built in California, the Mark III generation preserves the unmistakable Form Factor tone while introducing major advancements in power delivery, engineering efficiency, and international touring capability.

Trusted by touring professionals and session bassists for over a decade, the Bi Series has always been about one thing: delivering clean, authoritative, uncompressed bass tone under any conditions. The Bi1000 Di Mark III continues that legacy at an entirely new level — engineered around the new Dynamic Power Supply, refined limiter circuitry, and a universal voltage architecture that travels anywhere in the world.

What it does

At the heart of the Bi1000 Di Mark III is the new Dynamic Power Supply (DPS) — a re-engineered output stage incorporating an expanded capacitor bank that maintains a flat 1000 watts RMS at both 4-ohm and 8-ohm operation, across the entire bass register. A four-band tone stack with a four-position mid-frequency selector (0.5, 1.0, 2.0 or 2.5 kHz) provides precision tone shaping for any acoustic environment, while the refined limiter circuit responds with greater dynamic nuance, allowing players to dig in without unwanted artifacts or abrupt compression. Universal 100–240 VAC auto-switching power makes the Mark III ready for any stage on any continent, in a powder-coated aluminum chassis engineered to fit naturally into a gig bag, a backpack, or a studio rack.

“The Mark III's dual XLR architecture serves a specific purpose. The pre-EQ output sends your instrument's signal — clean, uncolored, exactly as the bass produces it — directly to the studio engineer or recording chain. The post-EQ output captures everything you've shaped at the front panel: gain staging, tone curve, limiter setting. Two contexts, two purpose-built outputs. That philosophy has defined the Bi Series since the original Bi1000, and it's at the heart of every Mark III amplifier we ship.” — Mike Lera, Head of Engineering & Design


In use

The Bi1000 Di Mark III is built for the bassist whose week takes them from a Tuesday rehearsal to a Friday club date to a Sunday studio session — and a flight to Berlin the next morning. Plug it in anywhere in the world, run a single 8-ohm cabinet for fly dates without losing power, or stack two cabinets for full-stage rigs. The dual DI architecture means the front-of-house engineer hears the tone the player intends on stage; the studio engineer receives a clean, uncolored DI track for the mix, captured from the same chassis at the same moment.

Why working bassists choose the Bi1000 Di Mark III

  • 1000W RMS at both 4Ω and 8Ω — flat power across any matched cabinet configuration
  • Universal voltage architecture for international touring
  • Dual XLR direct outputs (pre-EQ and post-EQ) for studio and FOH simultaneously
  • Four-position mid-frequency selector (0.5 / 1.0 / 2.0 / 2.5 kHz) adapts to any room or recording context
  • Powder-coated aluminum chassis built for the road, designed and built in California
  • Made in California

Specifications

Configuration
Class D Amplifier
Power Rating
1000 W @ 4 Ω · 1000 W @ 8 Ω
Frequency Response
20 Hz – 20 kHz (±0.25 dB, 8 Ω, 3 dB below rated power)
THD+N
< 0.05% (20 Hz – 20 kHz, 8 Ω, 3 dB below rated power)
Mains Input
100–240 VAC, 50–60 Hz · Universal Power Supply
Nominal Current
12.5 / 10.0 A
Voltage Range (Min / Max)
90–264 VAC
Power Supply
Dynamic Power Supply (DPS) · Extended block 4 × 4700 µF
Direct Outputs
2 × Balanced XLR Direct Out — one Pre-EQ, one Post-EQ
Connectors
2 × NL4 Speakon™ · 1 × Powercon™ · 6 × Neutrik ¼″ · 2 × Balanced XLR
Controls
Gain · Limiter · Master · Mute
Tone Controls
Bass · Mid · Mid Frequency Selector · Treble
Finish
Powder-Coated Aluminum
Color
Black
Weight
6 lbs / 2.7 kg
Dimensions (H × W × D)
2.9″ × 11.8″ × 9.1″ (73 × 300 × 230 mm)
Manufacture
Made in California
Shipping Weight
7.3 lbs / 3.3 kg
Shipping Dimensions (H × W × D)
6.8″ × 15.7″ × 13.4″ (175 × 400 × 340 mm)

Construction and components

More in this category